Search
  1. Home >>Blog >>

Rotor Stator of Colloid Mill Machine

riqiJul10, 2019 noteBy Serena
The most important grinding part of the colloid mill machine is composed of stator and rotor, which is generally made of 420 stainless steel.

The colloid mill rotor stator have super crushing ability and are widely used for material grinding in food industry, chemical industry, pharmaceutical industry, daily chemical industry, construction industry and other industries.
 
Grinding process of rotor stator colloid mill machine:
There is a small adjustable gap between the stator and the rotor. When the material passes through this gap, it is subjected to strong physical effects such as shear, friction, high frequency vibration, high speed whirlpool, etc. to achieve the effect of ultra-fine crushing and emulsification of the material.
Rotor Stator of Colloid Mill
How to disassemble the stator and rotor properly. The following is the correct method of removing the stator.

1. Turn the feeding bucket counter clockwise and remove the O sealing ring and gasket. Then the inlet and outlet nozzles are removed. Loosen cap screws, remove the retaining ring and gasket. Counter clockwise, adjust the ring and remove, remove the gasket. The stator bracket and stator assembly are advanced.
2. Unscrew the inner six angle screws, remove the spring washer, separate the stator bracket, and remove the two 0 rings.
3. The assembly of the stator is done in the opposite order.
4. Each component should be cleaned before assembly.
5. When installing, it is necessary to apply the required lubricating oil to each contact and thread.
6. When the feeding bucket and the water inlet and outlet faucet are removed, the adjusting ring can also be turned counterclockwise, and the fixed ring, the adjusting ring, the stator bracket and the assembly of the stator assembly are all taken out, and then the stator is disassembled according to the order in the upper part.

Introduction of Colloid Mill Machine


Related Product:Peanut Butter Colloid Mill
Message

Please feel free to submit your inquiry with the form below. We will reply you within 24 hours.

Leave Message

Number Change