Peanut Shell Cracker Machine

Peanut shell cracking machine mainly utilizes the rolling force of the six grain surfaces of the rolling bar and the peeled-off grid to realize the peanut shelling on average and high efficiency. Shelling peanuts along the screen surface up through the kernel control mechanism automatically bagging, not peeled peanut small fruit, then along the screen surface down through the feed back into the wind machine feed port, and then mention by the wind Machine into the other two shelling bar roll peel, and then separation and clearance, in order to achieve full shelling.

 

Summer can be drier peanuts dipped in the large pool, immediately after immersion dip and covered with plastic film for about 1 day, then drying in the sun, to be suitable after the beginning of wet and dry shelling. Winter before peanut shelling, first with about 10kg warm water evenly sprayed on 50kg of fruit and plastic film covered with about 10 hours, then cool in the sun for about 1 hour after these steps can begin shelling, Other seasons covered with plastic film for about 6 hours.

Peanut shelling machine advantages:

1, the more dry peanuts can be immersed in a large pool, immediately after immersion dip and covered with plastic film for about 1 day, then drying in the sun, to be suitable after the beginning of wet and dry shelling.

2, the loss rate is low, broken rate is small.

3, peanut shelling machine shelling clean, high productivity, there are clearance device shelling machine, but also requires a higher degree of cleanliness.