The Operation of Roasted Peanut Peeling Machine

Roasted peanut peeling machine is one of the main products of our company. What do you know about the operation of peanut peeling machine? Here is a brief introduction.

1, fixed the motor, so that the two Geneva in the same line, the power must be properly grounded, good anyway, after the turn, idling stop after 5 minutes to check whether all parts of screws loose, loose belt, lubricating parts are hot pressing, and two new, such as abnormal should be adjusted.

2, coarse and fine rubber rollers is gapless with coarse rollers by adjusting the spring pressure, through the action of the rocker arm is tightly pressed on the fine spring roll, pitch is bigger, the pressure is small, to the rough roller pressure is small, and vice versa. Spring pitch adjustment requires about 2-4mm this is the key to influence, peeling effect, this machine factory has adjusted to the position range, but according to the actual situation of the user should always pay attention to the adjustment.

3, peanut peeling machine operation before covering the driving parts of the protective cover, operation must implement safety first regulations, strictly according to the operating procedures, without any negligence.